Smarty SR (off-road)S67ME Dodge Cummins Turbodiesel 6.7L 07.5-09

Smarty SR (off-road)S67ME Dodge Cummins Turbodiesel 6.7L 07.5-09
Click To Enlarge
  • Item #: S67ME 07.5-09 Dodge
  • Manufacturer: Mads Electronic
  • Condition: New

 

Fast guide to Smarty’s special Features


  • CaTCHER software's
    inside

  • Ten different
    performance levels

  • Fastest download in the
    industry, up to three times faster than the

    competition, a typical ECM update takes about 5 minutes

  • ABS tire height updates
    in just few seconds

  • Manual High Idle is
    enabled in all softwares

  • Reads Diagnostic Trouble
    Codes in plain text

  • No tools required, no
    fuses to pull

  • USB built in for simple
    updates

  • Free internet updates

  • Most complete keyboard
    in the industry

  • Reliable, it works off
    your OEM hardware

  • Programmable Speed
    Limiter from 25 to 250 mph

  • Programmable parameters
    for fine tuning

  • Power on Demand**

** PoD function not yet available for MY 2010 and above trucks

*** Unlike the Smarty S06 for the 5.9L, the Smarty S67 is not untraceable

 

Fast guide to Smarty's software levels

 

The horsepower settings. except #0, all other
softwares have a

modified "Torque management" ( TQM ). The throttle response is

greatly improved but is set to a safe limit. With "Safe" I mean safe
for

your tranny and rest of the driveline.


  • SW # 0 : Half power

  • SW # 1 : 30 hp increase,
    with added timing

  • SW # 2 : 60 hp increase,
    no added timing ***

  • SW # 3 : 60 hp increase,
    with added timing

  • SW # 4 : 90 hp increase,
    no added timing ***

  • SW # 5 : 90 hp increase,
    with added timing

  • SW # 6 : 130 hp
    increase, no added timing ***

  • SW # 7 : 130 hp
    increase, with added timing

  • SW # 8 : 170 hp
    increase, no added timing *** °°°

  • SW # 9 : 170 hp
    increase, with added timing °°°

 

°°° Do not use for prolonged high speed runs! Speeds exceeding approx
105

MPH can result in high exhaust gas temperatures and damage the Diesel

Particulate Filter (DPF) !!!

*** All even numbered softwares (2-4-6-8) without
timing are to be used for

stacking with other after market power adding devices that also add their own
timing. NO additional timing has to be used with the odd numbered softwares (1-

3-5-7-9).

Severe engine damage will result !!!



Tested on stock trucks
on our in house Dyno Dinamics Twin Retarder

Dyno
.

Stock means just that. Stock! Even the air filters were stock...



We checked the "baseline" ( the stock truck hp at the rear wheels )

twice in a day in order to be sure about our findings. The above

declared hp numbers are all rounded down to the closest number. For

example the 90 hp file actually did 96 hp. That's a 90 hp software for

me, not a 100. The 170 hp was 176.



ABS / Speedo recalibration

The tire height can be adjusted up to 44" in increments of 10 tenth of


an inch in just a couple seconds. Of course, Smarty needs to be VIN#

locked to the truck in order to get into the ABS adjustment section.



DTC Code reader

The name says it all.

You can read and erase codes. Codes are displayed also in plain

English. That's old news by now. Smarty S-03 was the first one to

provide that utility, others found the idea to be a good one too.

( Smarty does erase ABS codes too but does not display them )



ECM update speed

Faster than anything else on the market! Again we've done our

homework on the protocol. Less than 5 minutes. Three times faster

than a Star-Scan diagnostic tool or competitor.



We have developed our own bootloader in order to not have to pull

fuses should an update become interrupted for any reason. All you

have to do is to turn the key off / key on Smarty does everything else

on it's own.



Updates

The CaTCHER softwares as they are today are only a starting point.

Expect major news in future. We’re for your feedback, opinions, likes,

dislikes...

We will make Smarty do what YOU want, TOGETHER.

You will need to sign a waiver to purchase any DPF-Delete product.

Product will not ship til Waiver is faxed back to us. Fax (860) 455-9010

CLICK HERE for Waiver

 

  * Marked fields are required.
 
 
 
Qty*
Price $1,099.00
Reviews (0) Write a Review
No Reviews. Write a Review